Відео

How does it take to set everything up like the programming and light effects or building up the equipment, also how does it cost for a beginner

John thank you for sharing your videos. I recently found your sequence share of Paint it Black. I wanted to reach out and say thank you for your time spent on it . I really enjoyed it. Also how many pixels will be in this years show?

Who’s in 2024?

How do you set up a f48 with SRx2 on a unchained port(29-32)?

I live in egypt and ac mains only has 2 wired. How do I connect my power supply?

Thought this had something to do with the F16 fighting falcon, was disappointed.

What in the Clark Griswold

Thank you. This video was very helpful in understanding smart receivers.

Well explained, thanks for the video. One question. As you stated, you did that in a safe way without endangering your lights so there really was no risk to implementing this same testing strategy with all the pixels at once, so why bother? Unless biasing these backwards would blow them given the voltages used. Is there an advantage to using 2, rather than just 1? Having 2 allows you to observe the data being passed along, but assuming you are feeding the data in the correct side, it should light a single one also. Regardless, the pixels can be salvaged for spares/replacement down the road, so it's no loss either way.

F16 Falcon: not just a 1980's fighter jet anymore. That gives me an idea. This new back-scratcher I invented, I think I'll call it the F-22 Raptor!

what fan do you have on your controller box?

Great explanation, I was debating on using this setup or using just the SR4. I like your setup better.

Got mine last week too. It is a good day indeed.

Love your content, man!

It looks light the both inner/middle singing trees need to be swapped with each other, I guess you put them on the wrong port.

love your stuff

i ordered 2 of them.

Great info.

Thanks for this info. I like having options for different configurations.

Thank you for the video. I have been looking for similar walk through and your was easy to follow along to.

hey John - great build. I've ordered the same due to wanting to run my controller in the summer to run some pebbles hanging from Water can into Flowers - wife wanted a light show! Did anyone use "Screen" material to keep bugs/ants out?

For the standard US outlet the switch should be showing 115 on the red switch correct?

LOL, My Alexa agrees with your Alexa on the math.

Love those. They are going to change how we do trees,shrubs etc.

The fact that you spend the whole year preparing the show shows how much effort you put into it and it shows!!! I been watching your show since 2012! ¿Also just curious… how better are these compared to the old school pixels from the early 2010s???

if you know what network your pc is set up for, why not just set the ethernet address to the 10.0.0.x network on the f48 initially, that way your pc is on the same network and you can just set up the wifi in the controller.

I love watching all your videos and your videos help me on my lights show display sometimes

Do you vent your boxes?

John all Bambo Labs filaments come on re-usable reels. So you can buy new filaments with reels or the slightly cheaper refill only and use one of you used up rolls.

We loved watching the video. We watch Disney videos all the time. ❤

I use my 3D printer to print out brackets for my power supplies also. Ingenious the way 3D printing has come out for us light enthusiast. Your use of the ammo box is different than mine but it all serves a great purpose of customizing our setups. Are you still using LOR for programming or did you go to XLights??

Really like those 4 ports on the V4. It's like a bonus built-in diff receiver.

This would 'interrupt your flow' a lot more than just pushing the second stick in to the ratchet gear 🤷‍♂

the "tweaking" isnt all that bad now days.

Also with filament, I print with elegoo, sunlu, and my favorite is BuMat. All those print flawlessly on all my printers.

Have a couple of these and a few anycubic kobras. Love the x1c. Fingers crossed that bambu releases a larger build plate! Enjoy!!!!!

Neewbie here so seeing this side by side for the Denisty aspect was a big help. Thanks!!

You're going to love it! Stick with the Bambu filament on the plastic spools and it will be "out of the box " printing! Congrats!

Are you using windows 11 ? If So How do i connect to a cat 5 to controllers ? How do i change the adaptor settings For the IP addy?

Had to pick my jaw up off the floor, amazing!

What stud size should I use if I’m going to use a spade connector? I’m using 22-18 AWG to input power

Looks you had a better view than we did. It was cloudy and raining here in Katy.

I just got to buying the V4’s

John, Who do you purchase your pixels lights from? That would also be key to good looking props.

The fuse input does connect to the F16v5 so that you can establish two way communication and reset fuses, look at real time amps and volts on the web base interface. I see this to be a nice improvement for the smart receivers. The next F16v5 revision of this board resolves the issue of polarity.

I'm trying to get the BPM tracker. But its showing as disabled. Something to do with me needing to put the Vamp plugins in X86? It's starting to annoy me a bit 😂 I look forward to seeing if you have a workaround / advice. I can't seem to change where the plugin manager scans folder wise?

🐔🥚🐥

Hey John, Really great video and information AND especially stressing the exercising of caution handling these things. I wish they designed those connectors so they'd be less prone to accidents, buuuuut they don't. Well done and cheers!

*Promosm* 🙈

Thank you.